ProjectSums

Paint calculator

This calculator answers how many gallons of paint to buy for walls and ceilings, using the coverage on the can and the number of coats you will apply.

Calculator

ft
ft
ft
ft²

Default 20 ft².

ft²

Default 15 ft².

ft²/gal

Default 350 ft²/gal (about 8.6 m²/L). Smooth walls are often 350–400. Rough or porous surfaces are closer to 250–300.

Result

2

gallons to buy

Wall area
384.00 ft²
Openings
50.00 ft²
Ceiling
0.00 ft²
Paintable
334.00 ft²
Exact
1.91 gal
Quarts split
1 gal + 3.63 qt

Shopping list for this project

You need about 2 gallons.

Materials: 2 gallons of paint (buy locally so it can be tinted).

Tools that help

As an Amazon Associate I earn from qualifying purchases.

More tools →

Sponsored / Amazon Associate picks

Tools after you estimate

ProjectSums may earn from Amazon qualifying purchases. Calculators stay free; these are not brand endorsements. Educational only.

All labeled picks

How this calculator works

Wall area is the room perimeter × wall height, in feet. You can enter walls one at a time instead of a single room. Doors default to 20 ft² each and windows to 15 ft² each, and both the count and the area are editable. An optional ceiling is length × width.

Gallons = ceil(area × coats / coverage). Coverage defaults to 350 ft² per gallon. Labels often claim 350–400 ft² per gallon on a smooth surface; rough or porous surfaces are closer to 250–300. Coats default to 2. The result shows the decimal gallons, a gallons-and-quarts split (1 quart = 0.25 gallon), and the whole gallons to buy.

Metric coverage for that default is about 8.6 m²/L. The math still runs in square feet and gallons. Metric mode only converts what you type and what you read.

Source: Sherwin-Williams paint calculator guidance (350–400 ft²/gal).

Worked example (illustrative). A 12×12 room with 8 ft walls = 384 ft². Minus 1 door and 2 windows = 334. Two coats = 668 ÷ 350 = 1.91, so 2 gal. That 1.91 gal is 1 gal + 3.63 qt.

FAQ

Do I subtract doors and windows?

Subtract openings you will not paint. A standard door is about 20 square feet and a window is whatever the glass opening measures. Leaving them in the wall area is a safe overbuy; subtracting them is closer to the can coverage the label assumes.

Where does primer go?

This form estimates the finish paint only. If you need primer, run it as its own pass with the primer’s coverage and coat count. Do not assume the finish-paint gallons include a primer. Two finish coats is the usual plan for a color change; a same-color refresh is often one.

Why not use a flat 400 square feet per gallon?

That figure is a smooth-surface claim from many labels, and it already assumes ideal conditions. Texture, a dark undercoat, and cheap thin paint all fall short of it. Use the number on the product you are buying.

Does ceiling paint use the same math?

Yes. Ceiling area is length times width, divided by the coverage of the ceiling paint, times coats. Do not use wall height for the ceiling. If the ceiling paint has a different spread rate, enter that rate.

Should I round gallons up?

Yes for the can count. The exact gallons, including the decimal, are shown so you can see whether you are barely over a whole can or just starting the next one. Buy the whole cans; keep the decimal as a check.

Embed this calculator

Free to use on your site. Please keep the credit link.

Preview: open the embed · How embedding works

By ProjectSums Editors · Reviewed against manufacturer data and building-code references · Last updated October 4, 2026

Estimates only. Check product labels, manufacturer instructions and local building codes before you buy or build.