ProjectSums

Drywall calculator

This calculator answers how many drywall sheets to buy for walls and an optional ceiling. It does not estimate screws or joint compound.

Calculator

ft
ft
ft
ft²

Optional square feet. Leave at 0 to ignore openings.

Waste

%

Result

14

4×8 sheets to buy

Walls
384.00 ft²
Ceiling
0.00 ft²
Openings
0.00 ft²
Net area
384.00 ft²
Screws and joint compound are not included.

Shopping list for this project

You need about 14 × 4×8 sheets.

Materials: 14 drywall sheets plus screws, tape and joint compound (buy locally).

Tools that help

As an Amazon Associate I earn from qualifying purchases.

More tools →

Sheets at this waste factor
SheetAreaSheets to buy
4×832 ft²14
4×1040 ft²11
4×1248 ft²9

Sponsored / Amazon Associate picks

Tools after you estimate

ProjectSums may earn from Amazon qualifying purchases. Calculators stay free; these are not brand endorsements. Educational only.

All labeled picks

How this calculator works

Area = perimeter × wall height, plus an optional ceiling (length × width), minus optional openings you subtract yourself. Units are feet. Leaving openings in the area buys a little extra, which is often used on bad cuts.

Sheets = ceil(area × (1 + waste) / sheet area). A 4×8 sheet is 32 ft², a 4×10 is 40 ft², and a 4×12 is 48 ft². Waste defaults to 10%. Use 15% for a complex room. This page does not count screws or mud.

Worked example (illustrative). A 12×12 ft room with 8 ft walls and no ceiling or openings is 384 ft². At 10% waste that is 14 sheets of 4×8.

FAQ

Should I subtract doors and windows from drywall?

Subtract them when you want a tighter count. Enter the opening area in square feet. Leaving a single interior door in the total rarely changes the sheet count by a full sheet. A garage door will.

Are 4×8 and 4×12 sheets interchangeable in the count?

No. A 4×8 sheet is 32 ft², a 4×10 is 40 ft², and a 4×12 is 48 ft². The table shows all three. Buy the size you will carry in.

Does this include screws or joint compound?

No. The count is sheets only. Tape, mud, and screws depend on the finish level and the panel maker’s fastening table, which this page does not estimate.

Does this cover the ceiling separately?

Turn the ceiling on and its length × width is added to the wall area. The result shows the ceiling area on its own. The sheet math is the combined area divided by the sheet size you select.

Embed this calculator

Free to use on your site. Please keep the credit link.

Preview: open the embed · How embedding works

By ProjectSums Editors · Reviewed against manufacturer data and building-code references · Last updated October 4, 2026

Estimates only. Check product labels, manufacturer instructions and local building codes before you buy or build.