ProjectSums

Tile calculator

This calculator answers how many tiles and boxes to buy for a floor or wall, plus a grout estimate, after a waste allowance for cuts.

Calculator

Area sent from the square-footage calculator. Width is 1 ft until you edit it.

ft
ft
in
in
in

Default 3/8 in (0.375). Used as the grout depth.

in

Default 1/8 in (0.125).

Layout waste

%

Default 10. Use the count on the carton.

%

Default 10%, added before the bag count.

Result

132

tiles to buy

Area
120.00 ft²
Boxes
14
Grout
8.6 lb
Grout + 10%
9.5 lb
10 lb bags
1
25 lb bags
1

Shopping list for this project

You need about 132 tiles.

Materials: Tile for that piece count, plus grout. Bag counts are in the result.

Tools that help

As an Amazon Associate I earn from qualifying purchases.

More tools →

Sponsored / Amazon Associate picks

Tools after you estimate

ProjectSums may earn from Amazon qualifying purchases. Calculators stay free; these are not brand endorsements. Educational only.

All labeled picks

How this calculator works

Tiles = ceil(area × (1 + waste) × 144 / (tile length × tile width in inches)). Straight layouts default to 10% waste. Diagonal or large-format tile defaults to 15%. Boxes = ceil(tiles / tiles per box). The default here is 10 tiles per box — use the count on the carton.

Grout pounds = area × (tile length + tile width) / (tile length × tile width) × joint width in inches × joint depth in inches × 110 / 12. Joint depth starts at the tile thickness. Add 10% and round up to whole 10 lb or 25 lb bags.

Source: Custom Building Products grout coverage chart; the joint-volume geometry.

Worked example (illustrative). 12×12×3/8 in tile with a 1/8 in joint over 100 ft² needs 7.2 lb of grout before the bag allowance. With 10% for bags that is 7.9 lb, so 1 bag of 10 lb or 1 bag of 25 lb. At 10% layout waste the floor is 110 tiles, 11 boxes of 10.

FAQ

Should the grout joint be part of the tile size?

If you divide the room by the nominal tile size and ignore the joint, you slightly over-count tiles, which is the safe direction. If the box coverage already includes a standard joint, use that coverage instead of doing both.

How much extra tile do I need for a diagonal layout?

More than a straight grid. Diagonal and herringbone cuts throw away more of each piece, especially in a narrow room. Raise the waste factor above the straight-lay default.

Does this include thinset and grout?

Grout is estimated from the joint width, the joint depth, and the 110 factor in the coverage formula, then rounded up to 10 lb or 25 lb bags. Thinset is not included. Use the coverage on the mortar bag for the notch you will use.

Can I use this for a backsplash?

Yes. Measure the width of the run and the height you will tile, subtract the range hood or window if it falls inside that rectangle, and treat it as wall area. Outlets are usually too small to subtract.

Embed this calculator

Free to use on your site. Please keep the credit link.

Preview: open the embed · How embedding works

By ProjectSums Editors · Reviewed against manufacturer data and building-code references · Last updated October 4, 2026

Estimates only. Check product labels, manufacturer instructions and local building codes before you buy or build.