ProjectSums

Deck calculator

This calculator answers how many deck boards and joists to buy, and about how many screws that layout uses. It does not size spans.

Calculator

ft
ft
in

Default 5.5 in.

in

Default 3/16 in (0.1875).

Gap preset

ft

Default 12 ft.

Waste

%
in

Default 16 in on center. Check the composite maker’s specs.

Joist spacing preset

Result

58

boards to buy

Rows
26
Boards per row
2
Joists
13
Screws
about 676
This is a count, not a span design. Check local code and the AWC span tables.

Shopping list for this project

You need about 58 boards.

Materials: 58 deck boards and framing lumber (buy locally).

Tools that help

As an Amazon Associate I earn from qualifying purchases.

More tools →

Sponsored / Amazon Associate picks

Tools after you estimate

ProjectSums may earn from Amazon qualifying purchases. Calculators stay free; these are not brand endorsements. Educational only.

All labeled picks

How this calculator works

Rows = ceil(width across the joists, in inches / (board width + gap)). The board width defaults to 5.5 in and the gap to 3/16 in. Boards per row = ceil(length along the boards / board length). Board length defaults to 12 ft. Multiply rows by boards per row, then by 1.10 for a straight layout or 1.15 for a diagonal one, and round up to whole boards.

Joists = floor(length in inches / spacing) + 1. Spacing defaults to 16 in on center. 12 in is the other common spacing; check the composite maker’s specs before you tighten it. Screws are about rows × joists × 2.

This is a piece count, not a span design. Check local code and the AWC span tables before you choose a joist or beam size.

Worked example (illustrative). A deck 16 ft along the boards and 12 ft across the joists, with 5.5 in boards, a 3/16 in gap, 12 ft boards, 16 in joist spacing, and 10% waste: 26 rows, 2 boards per row, 58 boards, 13 joists, and about 676 screws.

FAQ

Is this a structural design?

No. It counts boards, joists, and screws from the size and spacing you enter. Joist span, beam size, and footing depth have to satisfy the code and the lumber you use. Check local code and the AWC span tables.

Why use actual board width instead of nominal?

A 5/4×6 deck board is not six inches of coverage. If you divide by the nominal width you will run out of boards before the far edge. Use the face width plus the gap.

Do I need an extra joist at the end?

Yes. Spacing describes the gaps between joists. A deck that is framed square has a joist at each end, so the count is spaces plus one, the same idea as fence posts.

How do footings relate to the concrete calculator?

This page does not count footings. If you already know the hole count, diameter, and depth, price that concrete on the concrete calculator. Keep the diameter as the hole, not the post.

Embed this calculator

Free to use on your site. Please keep the credit link.

Preview: open the embed · How embedding works

By ProjectSums Editors · Reviewed against manufacturer data and building-code references · Last updated October 4, 2026

Estimates only. Check product labels, manufacturer instructions and local building codes before you buy or build.