ProjectSums

Concrete calculator

This calculator answers how much concrete a slab, footing, or post hole needs, in cubic yards for ready-mix and in whole bags for bagged mix.

Calculator

ft
ft
in
%

Default 10%. Usual range 5–15%.

Result

1.23

cubic yards before waste

Volume
33.33 ft³
With 10% waste
36.67 ft³ (1.36 yd³)
80 lb bags
62
60 lb bags
82

Above about 1 yd³, ready-mix is usually easier.

Setting a basketball hoop? Use the basketball hoop concrete calculator

Shopping list for this project

You need about 62 × 80-lb bags.

Materials: 62 × 80-lb bags of concrete mix (buy locally), plus rebar or mesh and form boards if your slab needs them.

Tools that help

As an Amazon Associate I earn from qualifying purchases.

More tools →

QUIKRETE Concrete Mix bag yields
BagYieldBags per yd³Bags to buy
40 lb0.3 ft³90123
50 lb0.375 ft³7298
60 lb0.45 ft³6082
80 lb0.6 ft³4562
90 lb0.675 ft³4055

Sponsored / Amazon Associate picks

Tools after you estimate

ProjectSums may earn from Amazon qualifying purchases. Calculators stay free; these are not brand endorsements. Educational only.

All labeled picks

How this calculator works

A slab or footing is length × width × thickness. Length and width are in feet, thickness is in inches, and the volume in cubic feet is L × W × T / 12. A round column or hole is π × (diameter in inches / 24)² × height in feet. Multiply by quantity when you are pouring more than one. Cubic yards are cubic feet ÷ 27.

Waste defaults to 10% (a usual range is 5–15%) and is applied to the volume before the bag count. Bags = ceil(volume × (1 + waste) / yield). Counts round up to a whole bag. QUIKRETE Concrete Mix yields are 40 lb = 0.30 ft³, 50 lb = 0.375 ft³, 60 lb = 0.45 ft³, 80 lb = 0.60 ft³, and 90 lb = 0.675 ft³. That is 90, 72, 60, 45, and 40 bags per cubic yard.

Fence-post concrete

Use the round shape for a column or an empty hole. It does not subtract the post. The fence calculator does, using the hole diameter and the actual post section. Above about 1 yd³, ready-mix is usually easier than mixing bags.

Source: QUIKRETE Concrete Mix 1101 data sheet.

Worked example (illustrative). 10×10 ft at 4 in = 33.33 ft³ = 1.23 yd³. With 10% waste that's 62 bags of 80 lb, or 82 of 60 lb.

FAQ

Should I order ready-mix in cubic yards or buy bags?

Ready-mix is sold by the cubic yard. Bags make sense for small pads, post holes, and repairs you can mix yourself. Use the cubic-yard figure to compare a truck quote, and the bag count only for the mix whose yield matches the bag in your hand.

Why does the bag count round up?

Stores sell whole bags. Rounding to the nearest bag can leave you short of a full mix, which is worse than returning or keeping one extra bag. The volume in cubic feet is the exact figure; the bag count is the purchase quantity.

Does a 4-inch slab use the same math as a footing?

Yes. Both are length times width times thickness. A slab is usually a wide, thin rectangle. A footing is longer and thicker. Keep the thickness in the same unit as the length and width before you multiply.

How do I count concrete for fence posts?

Treat each hole as a cylinder. Use the hole diameter, not the post width, and the depth you will fill. Multiply by the number of holes, then convert that volume to bags using the yield on the bag. Subtract the post only if it will sit in the wet concrete and displace mix.

What is the waste factor for?

It covers spillage, uneven ground, and over-excavation. It is not a substitute for measuring the forms. If your base is already screeded flat and the forms are tight, you can lower it. If the hole is ragged, raise it.

Embed this calculator

Free to use on your site. Please keep the credit link.

Preview: open the embed · How embedding works

By ProjectSums Editors · Reviewed against manufacturer data and building-code references · Last updated October 4, 2026

Estimates only. Check product labels, manufacturer instructions and local building codes before you buy or build.